With pure copper or copper alloy made into a variety of shapes including bar, wire, plate, strip, strip, tube, foil, collectively referred to as copper. There are rolling, extruding and drawing methods for copper, hot-rolling and cold-rolling for copper plate and Strip, cold-rolling for Strip and foil, extruding and drawing for Tube and Bar, and drawing for wire.

Copper can be divided by composition into:

BRASS: an alloy of copper and zinc. 

White Copper: an alloy of copper and nickel

Bronze: An alloy of copper and other elements except zinc and nickel, chiefly tin bronze and aluminum bronze

Red Copper: pure copper, also known as Red Copper, pure copper density of 8.96, melting point of 1083 °C. With good conductivity and thermal conductivity, excellent plasticity, easy to hot and cold pressure processing, a large number of wires, cables, brushes, EDM special copper products require good conductivity.

1. Detection related

Copper Plate, copper bar, copper pipe, copper strip, copper wire, copper bar and other copper materials.

(1)Copper Rod is a kind of Non-ferrous Metal Rod, which has good processability and high conductivity. Mainly divided into brass Rod (copper zinc alloy, cheaper) , copper Rod (higher copper content) . Copper Rod Classification: Aluminum Bronze Rod, Tin Bronze Rod, Silicon Bronze Rod, beryllium bronze plate, brass plate, cupronickel plate, red copper plate, tungsten copper plate, oxygen-free copper plate, copper plate of various materials.

Common Brands: H59, HPb59-1, HPb59-3, H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, C5191, C51000, QBE2.0, C1100, T2, etc. . General Specification: Diameter: 1.0-200mm, length: 2500-6000mm.

(2)Copper pipe also known as Red Copper Pipe. A type of Non-ferrous metal, which is a pressed and drawn seamless tube. Copper pipe with strong, corrosion-resistant characteristics, and become the modern contractor in all residential commercial housing water pipes, heating, refrigeration pipe installation preferred. Copper pipe is the best water supply pipe.

Common Brand names: H62, H65, H68, H63, H70, H80, H90, C2600, C2680, C2700, C5210, C5191, C51000, QBE2.0, C1100, T2, etc. . General Specification: Wall thickness: 0.1-100mm, outside diameter: 1-600mm.

(3)Copper Strip is a kind of metal element, the product specification has 0.1 ~ 350 ~ 250mm various state copper strip product, mainly uses in the production electric appliance component, the lamp head, the battery Cap, the button, the seal piece, the connector, mainly uses in the electric conduction, the heat conduction, the corrosion resistance equipment. Such as electrical components, switches, washers, gaskets, electric vacuum devices, radiators, conductive base materials and Automotive Water Tanks, heat sinks, cylinder pieces and other parts.

Common Brand names: H62, H65, H68, H63, H70, H80, H90, C2600, C2680, C2700, C5210, C5191, C51000, QBE2.0, C1100, T2, etc. . Specification: thickness: 0.01-2.0 mm, width: 4-600 mm.

4. Copper wire has good conductivity, heat conduction, corrosion resistance and processing properties, can be welded and brazed. The trace oxygen has little influence on the conductivity, heat conduction and processing, but it is easy to cause "hydrogen disease" , so it is not suitable for processing (annealing, welding, etc.) and using at high temperature (such as & GT; 370 °C) in reducing atmosphere.

Common Brands: H62, H65, H68, H70, H80, H90, C2600, C2680, C2700, C5210, C5191, C51000, QBE2.0, C1100, T2, etc. . Specification: wire diameter: 0.01-15.0 mm

5. Copper bar is a kind of high current conductive product, which is suitable for high and low voltage electric appliance, switch contact, distribution equipment, busbar slot, etc. . The electrical copper bars we supply have the advantages of low resistivity and high flexibility.

Common Brands: H59, H62, H65, C2700, C2680, C2600, H68, H70, C5210, C5191, C51000, QBe2.0, etc. 

Specification: Thickness: 1-100mm, width: 10-400mm.

2. TESTING

(1)Brand identification

(2) Material Identification: Titanium Alloy, steel, aluminum alloy, copper alloy and other kinds of metal, alloy and its products material identification;

(3)Mechanical Properties: tensile test at room temperature, tensile test at high and low temperature, Young's Modulus e and Poisson's ratio, R value, N value, compression test at room temperature, bending test, repeated bending, bending strength, yield, fatigue, torsion, stress, stress relaxation, low temperature impact, high temperature impact, wear, resistance to hydraulic pressure, tensile creep test, shear strength, impulse static pressure test, rotation and stress, fatigue test, etc.

(4)PROCESS PROPERTIES: Fine Wire drawing, fracture inspection, repeated bending, two-way twist, hydraulic test, expanding, bending, curling, flattening, ring expanding, ring stretching, microstructure, cupping test, metallographic analysis, etc.

3.Test Standard

DB34/T 1237-2010 copper processing enterprise energy metering equipment and management requirements 

GB/t 20302-2014 anode phosphorus copper

 JB/t 5706-1991 copper softening annealing resistance heating furnace energy consumption classification

 JB/t 8494.2-2012 metal packing hydraulic press part 2: Technical Conditions 

Source: traceability